Your position: Home / 808nm Laser Handpiece &Parts / laser handpiece Repair / 808nm Handpiece Model U Repair

Model U - 300W Diode Laser Hair Removal Machine Handpiece Repair

ModelModel U - 300W Diode Laser Hair Removal Machine Ha
This 808nm hair removal handpiece  model U is made of 6 bars laser stack with 300W optic power. The laser bars in this handpiece is similar with VS-MA-50-5-GTH. Differences: both positive and negative electrodes are on the top of  the back side.
Price:
    Please select the information you wantX
Quantity:
-
+
(100 available)
Shipping Cost:
to
Estimated Delivery Time:
Please select the country you want to ship from
  • Description
  • Reviews

This 808nm hair removal handpiece  model U is made of 6 bars laser stack with 300W optic power. The laser bars in this handpiece is similar with VS-MA-50-5-GTH. Differences: both positive and negative electrodes are on the top of  the back side.
Most of this handpiece will be broken after 1-2millions shots. then the laser stack which is in it will burt out. 
We remove the old burnt bar and replace with new bar. After that, the handpeice will become as a new one.
Repairing procedure Advantages
>Chioce A: Send the old broken handpiece to our facatory. We will do the process of checking , repairing, cleanning and etc. Then send the fresh new handpiece back to you. >Save Money. Replace the broken diode stack only. Low cost and convenient
>Chioce B:  if you have basic assambly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack. >Long life time.  we use diode laser bars from Germany. The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. life time is much longer than before
>Choice C: Measure your stack and comfrim the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old hadnpiece.  >All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technology are open to you.  
 
Specification
Model No.  808nm hair removal handpiece  model U repair only
Application 808nm diode laser hair removal machine which is made in china
Operation Mode CW
Optic Power per handpiece 300W
Optic Power per submounts 50W
Number of submounts in one stack 6bars
Central wavelength at 25℃ 808 ± 5nm
Typical Operation current 40A
Maximum Operating current 50A
Typical Threshold current 7A
Maximum Operating Voltage <10V
Fast Axis Divergence (FWHM) 39º
Slow Axis Divergence (FWHM)
Operation Condition non-condemsing atmosphere, cleaning room
Expected lifetime 10millions shots
Typical pitch per bar 2mm
Cooling requirement  
Flow rate 3L/min +-10%
Water Temperature 25+-3°C
Water Quality pure water, mixed bed ion exchanger,particle filter<25µm
cooling system Do not use any material that combination

More question, please click here to email me.
Average rating: 5.0
Share your thoughts with other customers
Write a review
Product reviews can be carried out after the member login, please click here to login