Your position: Home / 808nm Laser Handpiece &Parts / laser handpiece Repair / 808nm Handpiece Model Q Repair

Model Q - 808nm 500W Diode Laser Hair Removal Handpiece Repair

ModelQ
This diode laser hair removal handpiece model Q is made of  5 pcs diode bar with micro channel cooler.  Total optice power is 500W. The laser bar in this handpiece is VS-MI-100-6-FL-A
Price:
Wholesale:
1-9
$1,990.00
10+
$1,780.00
    Please select the information you wantX
Quantity:
-
+
(10000 available)
Shipping Cost:
to
Estimated Delivery Time:
Please select the country you want to ship from
  • Description
  • Reviews

This diode laser hair removal handpiece model Q is made of  5 pcs diode bar with micro channel cooler.  Total optice power is 500W. The laser bar in this handpiece is VS-MI-100-6-FL-A
Whole handpiece is made in China.  
Service mode: Repair the broken diode laser in the handpiece. Such as replace new laser stack, test TEC peltier, cleaning and so on. 
Repairing procedure Advantages
>Chioce A: Send the old broken handpiece to our facatory. We will do the process of checking , repairing, cleanning and etc. Then send the fresh new handpiece back to you. >Save Money. Replace the broken diode stack only. Low cost and convenient
>Chioce B:  if you have basic assambly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack. >Long life time.  we use diode laser bars from Germany. The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. life time is much longer than before
>Choice C: Measure your stack and comfrim the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old hadnpiece.  >All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technology are open to you.  
 
Specification
Model No.  808nm Diode laser hair removal handpiece model Q
Application 808nm/810nm diode laser hair removal machine
Operation Mode CW
Power per submounts 100W
Number of submounts in one stack 5bars
Central wavelength at 25℃ 808 ± 5nm
Typical Operation current 60A
Maximum Operating current 90A
Typical Threshold current 15A
Maximum Operating Voltage <12V
Fast Axis Divergence (FWHM) 39º
Slow Axis Divergence (FWHM)
Operation Condition non-condemsing atmosphere, cleaning room
Expected lifetime 10000hours
Typical pitch per bar 1.8mm
Cooling requirement  
Flow rate 1.5L/min +-10%
Water Temperature 25+-3°C
Water Quality Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm
cooling system Do not use any material that combination

More question, please click here to email me.
Average rating: 5.0
Share your thoughts with other customers
Write a review
Product reviews can be carried out after the member login, please click here to login