Your position: Home / Hair removal beauty machine

Rabby Triple wavelength 808+755+1064 800W Diode Laser Hair Removal Machine

laser machineMI-P-800
Portable MODULE C Micro Channel 220V 110V 10HZ 808+755+1064 800W Diode Laser Hair Removal Machine
    Please select the information you wantX
  • Handpiece Spot Size:
  • Wavelength:
  • colour:
    Black gray+white
  • voltage:
    220v 50hz 110v 50hz
( available)
  • Description

Rabby Triple wavelength 808+755+1064 800W Diode Laser Hair Removal Machine

Machine details


Product Specifications

Machine namePortable Diode Laser Hair Removal Beauty Machine
Functionshair removal,fast hair removal,skin rejuvenation
Laser Diode Module800w , micro channel,40 millons shots life span
Energy Density0~120J/cm2
Pulse Width0~600ms
Repetition Rate1~12Hz
Skin Cooling Temperature-5℃--5℃ by cooled Sapphire
Spot Size10x17mm 12x20mm 15x25mm optional
Interface LanguageAll Kinds,But no more than 2 languages per machine
LCD Screen10.4"
System Cooling MethodAir cooling+Water cooling+TEC
Packing Box Dimension65(L)x63(W)x61(H)cm
Net Weight50KG

Laser Handpiece


808nm Handpiece
810nm laser offers deep penetration of the hair follicle with high average power, a high repetition rate for fast treatment. The 808nm has a moderate melanin absorption level making it safe for darker skin types.

Micro Channel Cooling Diode Laser Stack

Diode Laser Stack |

* Jenoptik Laser Bars From Germany( same laser supplier to alma lasers, syneron,oriental-laser) 
* Micro Channel Cooling Structure( The longest life laser cooling structure on the market )
* Gold tin hard solider technology(High temperature resistance, oxidation resistance)
* 7 Test Standards
* Triple wavelength 755nm, 808nm, 1064nm in one machine

Operating system interface
Independent research and development design interface, easy to operate, 3 treatment mode design

Cooling System —— a system that protects the heart
Water heat disspation system combine with the wind system
The process is water pump push the water flows circulation from water tank to handle then goes to condenser finally back to water tank .

In Order To Get A Good Cooling Results

the water pump need higher pressure,we adopt centrifugal brushless water pump. Pressure stronger ,working stable . The water circulation speed faster.
We adopt 3L water tank , combines these to get the best results , from the test feed back , our machine could working on max power for more then 12 hours without serious heat

Water filtering system
We have designed an impurity filtration system to ensure that the fine passage of the laser will not be blocked, ensuring a longer service life of the handpiece.

PP water filter : filter various particulate impurities in the liquid(rust, sand)
Ion-excahnge water filter : displacement of adsorbed ions
germicidal lamp devicesSterilization lamp : kill bacteria, fungi and microorganisms in water
Generally, germicidal lamp devices are rarely used in laser hair removal devices.

Control System
The control system is independently developed, with higher compatibility and stronger stability.
Multi-function system alarm system

In order to make the laser instrument safer and have a longer life, we have designed a professional standard safety alarm system from the water flow, temperature, operating system, etc., so that you can use it more safely in the hair removal process.

Professional security alarm system
Water flow alarm : If water flow is not smooth, the icon of water flow will be red .The machine makes an audible alarm.
Water temperature alarm: operator could adjust a temperature number like 35 centigrade. Buzzer often rings。When machine temperature reaches 35 centigrade, machine can not shot and should have a bit rest.
Operation error alarm - when the "ready" key is not pressed, that is to say, in the "standby" state, press the hand switch, buzzer often rings, at this time the screen alarm prompt "Operation wrong".
Laser or power failure - When the LED in the laser is damaged and the laser power supply is damaged, the buzzer will sound frequently. At this time, the alarm will prompt "please check diode laser or diode driver".
The working time of the equipment is too long or the controller is disconnected from the drive cable. When the working time of the machine is too long, or the controller and the drive cable are disconnected, the buzzer will sound often. At this time, the alarm prompts "mos" on the screen. Temperature high". At this point, the machine should be turned off. After cooling for a while, turn the machine back on. If the alarm cannot be eliminated, check the controller and drive power cable.
Handpiece connection situation - When the handpiece is separated from the machine, the alarm message will be prompted after the power is turned on, and the buzzer will sound frequently. The device should be turned off immediately. Otherwise it will cause irreparable damage to the waterway (the pump is broken).



1. What is the laser power output per bar of 808nm diode laser? 

2. How many bars in one diode laser stack? 
 There are 6-12pcs bars in one stack as you like.  

3. What kinds of heat-sink you use in the 808nm diode laser handle piece? 
We usually use Micro channel cooler heat-sink to build 808nm diode laser stack,which is with high reliability and long life-time.But if customer require,we can also provide macro-channel heat-sink diode laser stack with competitive price.  

4.What is the delivery of time of 808nm diode laser machine? 
Standard product of 808nm diode laser machine are all in stock.  
Shipping via Express can be within 3-5 working days.While if customized, the machine can be shipped out within 2 weeks. 

5. What is the warranty of 808nm diode laser machine? 
For whole system,we give warranty of machine 1 year or 10 million shots of lifetime.
During this period,if any problem of machine,please feedback soon and we will solve your problem at our best and at the earliest time.