This VS-MI-60-12-AlmaSoprano-C is Alma Soprano 12 bar laser stack with black side plate & right-angled electrode.
It is used for Alma Soprano handle piece repairing and replacement. This VS-MI-60-12-AlmaSoprano-B is Alma Soprano 12 bar laser stack with blue side plate. The electrodes are on the back of the stack.
It is used for Alma Soprano handle piece repairing and replacement.
|>Chioce A: Send the old broken handpiece to our facatory. We will do the process of checking , repairing, cleanning and etc. Then send the fresh new handpiece back to you.||>Save Money. Replace the broken diode stack only. Low cost and convenient|
|>Chioce B: if you have basic assambly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack.||>Long life time. we use diode laser bars from Germany. The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. life time is much longer than before|
|>Choice C: Measure your stack and comfrim the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old hadnpiece.||>All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you.|
In the past 10 years, we have repaired various brands and different types of lasers (such as alma, dilas, focus light etc.), which are used on laser hair removal handle pieces.
Oriental-Laser Provide Service:
Professional Alma Laser Diode Stack Repair / replacement
OEM Alma Laser Diode Stack
Oriental-laser offers 6 months warranty for the micro channel cooled laser stack.
|Application||Alma Soprano Handle Piece Repair And Replacement|
|Power per submounts||100W|
|Number of submounts in one stack||12bars|
|Central wavelength at 25℃||808 ± 5nm|
|Typical Operation current||60A|
|Maximum Operating current||90A|
|Typical Threshold current||15A|
|Maximum Operating Voltage||<24V|
|Fast Axis Divergence (FWHM)||39º|
|Slow Axis Divergence (FWHM)||8º|
|Operation Condition||non-condemsing atmosphere, cleaning room|
|Typical pitch per bar||1.8mm|
|Flow rate||3.6L/min +-10%|
|Water Quality||Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm|
|cooling system||Do not use any material that combination with copper|
Alma Soprano Model B Dimension
More Products Dimension Design Details & Customized Services > Please Contact Us
Company and cleaning lab details:
1.Professional laser cleaning lab for laser head mounting, laser stack assemble and also laser handle assemble
You are welcome to visit our factory, and see our technical and service and build a good business relationship
More About Our Company Information Details >>>Click Here
Our Services Warranty:
For Soprano Xli handle, micro channel laser part, Oriental-laser is pleasure to offer a warranty for 6 months
Please send your old damage laser part or handle by DHL, FEDEX OR TNT UPS OR EMS, and send to our address as:
Oriental Laser (Beijing) Co.,Ltd
Address : Room 403,3rd Building,No.2 Shengfang Road,Daxing Industry Zone,Daxing Dis. Beijing.
Tips: To pack the laser head or laser handle in a safe box, and make sure safety during delivery, no any damage. Also please drain away water from the laser diode head or handle,make sure no water inside the water road or water tube inside the laser head or handle to avoid further damage.
Please put a paper list include the following information:
1.Contact person name
3.Address details, include street city name and country name
6.Email ID or whatsapp ID that i can contact you when i get the parcel
Tips: Never write the word laser with the parcel, to avoid some problems as:
1.Customs clearance delay
3.High delivery cost
Advice for laser machine maintain：
1.Please change filter once for 6 months.
2.Please add DI water to machine, and 1 month change water.
3.Please drain out water from machine if machine long time no working.
4.Please let the machine take a rest for 5 mins after 2 hours working, please love your machine, and it will also love you.